
搜索
Number of views:
1000
JLM-B153 Fingerprint water drop handle
Surface treatment: electrolysis
Material: titanium magnesium alloy
Configuration: fork
Product serial number
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000

Quantity
-
+
Stock:

Website's Pic when there may be error,and the actual product color and the shape of the differentspace, area and the light also can produce different colour deviation, correct color please refer to our actual product.
1
Describe
Parameters
Detailed introduction
Specification parameters
Color recommendation: Mirror sapphire, mirror deep bronze, mirror pearl silver
Surface treatment: electrolysis
Material: titanium magnesium alloy
Configuration: fork
Handle usage and precautions:
1) Handle cover cannot be taken out of the lock handle, take out the handle cover from the base, rotate 90 "and put it in the center;
2) Put the lock fork into the punched hole, link the t-pin on the aluminum rod with the lock fork, and generally center the fork;
3) On the bottom of the lock, the self tapping screw hole is taken as the standard. First draw the position point, then drill the hole with twist drill, and then screw it with the tapping screw (it is generally recommended to use self tapping screw
Tap screw, not self drilling screw), and finally cover.
4) After installation, the opening smoothness of the commissioning handle is smooth. If the yoke and bottom gasket are tightened, check whether the fork and bottom gasket are matched with the handle base (if the thickness is tight, the thin piece is
Pine)
5) When closing the window, if the hand feels tight, please adjust the position of the eccentric pin again to achieve the smooth switch effect;
6) Please do not tear off the protective plastic film or rubber sleeve on the handle before the door and window are not delivered to the owner for use, so as to avoid scratching.
2) Put the lock fork into the punched hole, link the t-pin on the aluminum rod with the lock fork, and generally center the fork;
3) On the bottom of the lock, the self tapping screw hole is taken as the standard. First draw the position point, then drill the hole with twist drill, and then screw it with the tapping screw (it is generally recommended to use self tapping screw
Tap screw, not self drilling screw), and finally cover.
4) After installation, the opening smoothness of the commissioning handle is smooth. If the yoke and bottom gasket are tightened, check whether the fork and bottom gasket are matched with the handle base (if the thickness is tight, the thin piece is
Pine)
5) When closing the window, if the hand feels tight, please adjust the position of the eccentric pin again to achieve the smooth switch effect;
6) Please do not tear off the protective plastic film or rubber sleeve on the handle before the door and window are not delivered to the owner for use, so as to avoid scratching.
Keyword:
drop
the
and
handle
screw
is
fork
lock
to
of
contact information
Business Consulting:
Mr. Ding 133 8025 9489
Miss Yang 189 2728 9996
Email: 2410096915@qq.com
Asia Pacific Office: room a25, 8 / F, Silver Tower, 707-713 Nathan Road, Mongkok, Hong Kong, China

National Service Hotline: 400 8336 822
Copyright © 2021 All Rights Reserved Foshan Nanhai Dali xiongtao decoration materials firm 粤ICP备15098155号 300.cn