搜索
搜索
Search

Product

/
/
/
JLM-B154 Fingerprint water drop handle
Number of views:
1000

JLM-B154 Fingerprint water drop handle

Color: Mirror sapphire, mirror deep bronze, mirror pearl silver
Surface treatment: electrolysis
Material: titanium magnesium alloy
Configuration: square axis
Product serial number
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Color recommendation: Mirror sapphire, mirror deep bronze, mirror pearl silver
Surface treatment: electrolysis
Material: titanium magnesium alloy
Configuration: square axis
 

新尚景
Quantity
-
+
Stock:
tes
Website's Pic when there may be error,and the actual product color and the shape of the differentspace, area and the light also can produce different colour deviation, correct color please refer to our actual product.
1
Describe
Parameters
Detailed introduction
Specification parameters
Color recommendation: Mirror sapphire, mirror deep bronze, mirror pearl silver
Surface treatment: electrolysis
Material: titanium magnesium alloy
Configuration: square axis
 
Handle usage and precautions:
1) The handle cover cannot be taken out from the lock handle. Take out the handle cover from the base, rotate it 90 degrees, and put it in the middle to expose the machine wire connecting lock box hole and self tapping screw
The hole is enough;
2) Insert the handle into the front aluminum hole, adjust the angle of the lock box, and insert the square shaft into the lock box;
3) Put the machine wire through the lock box hole and connect it with the lock box body machine wire hole (or sliding block). When connecting, don't screw it too tightly, it should be the lock box drive
The most smooth, so as not to pull the lock box, resulting in unsmooth opening (six hole design, the handle is not fixed by machine wire, but self tapping screw)
4) When it is connected with the sliding block, it can be screwed to the most tight position, and the lock box and handle will not be loosened. It is generally recommended to use self tapping screw instead of self drilling screw.)
5) Then use self tapping screw to fix the self tapping screw hole, tighten the screw diagonally, and fix the handle on the aluminum surface;
6) After the screw is installed, adjust the switch handle, adjust the tightness of the two long wires of the lock box, and adjust the lock box to the most smooth;
7) Return the handle cover to its original position and cover it well (Note: when installing the screw thread, the air driver should avoid damaging the lock cover as much as possible)
8) Before the door and window are delivered to the owner for use, please do not tear off the protective plastic film or plastic sleeve on the handle to avoid scratching.
(note that when locking and closing the window, if the handle is too tight, please adjust the position of the core pin again to achieve the effect of smooth opening and closing, and prolong the service life of the lock box and handle!)
Keyword:
drop
the
and
lock
handle
box
to
it
screw
of
We could not find any corresponding parameters, please add them to the properties table

contact information


Business Consulting:
Mr. Ding
133 8025 9489

Miss Yang 189 2728 9996
Email: 2410096915@qq.com

Asia Pacific Office: room a25, 8 / F, Silver Tower, 707-713 Nathan Road, Mongkok, Hong Kong, China

imgboxbg

National Service Hotline: 400 8336 822

Copyright © 2021   All Rights Reserved   Foshan Nanhai Dali xiongtao decoration materials firm  粤ICP备15098155号   300.cn

© 2019 德国库勒五金有限公司 All rights reserved. 粤ICP备19059200号 网站建设:中企动力佛山
  • AMER
  • AMER
    AMER
  • AMER

    服务热线:
    400-8336-822

  • AMER