搜索
搜索
Search

Product

Number of views:
1000

JLM-HC012

22 square 4.0 thick heavy duty non impact all copper plate hinge -304 easy to install, heavy duty, bearing 80kg -Special for 23 slots -1.2 bottom trough
Product serial number
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
新尚景
Quantity
-
+
Stock:
tes
Website's Pic when there may be error,and the actual product color and the shape of the differentspace, area and the light also can produce different colour deviation, correct color please refer to our actual product.
1
Describe
Parameters
Detailed introduction
Specification parameters
How to use the hinge and precautions:
 
1) Before installing the sliding brace, punch the gap at the corner of the fan first, and calculate the amount of the fan lap at the bottom of the two frame groove - 43mm, generally the amount of the single side lap is 5.5mm;
2) When installing the sliding support, check whether the sliding support moves smoothly. Put the hinge No. 1 through the punching notch and the hinge through to the end. At this time, the 90 degree plug is completely inserted into the aluminum groove on the side, and then avoid the corner code;
3) Fix the middle hole of hinge with temporary positioning hexagon screw. After all parts of No.1 part are in place, fix the panel (fasten with m5x12 or m5x16 stainless steel countersunk screw). First tighten the screw hole on the reinforced side, and then fix No.1 part on the side aluminum with full screws (generally, it is recommended to use self tapping screw instead of self drilling screw)
4) After opening the hinge for 80 degrees, the positioning head of the bottom part of the hinge is close to the bottom of the frame slot, install the fan into the outer frame, tighten the temporary adjusting screw hole (the position can be forward and backward) with the steel flat head screw, after stabilizing the sliding support, adjust the position of the sliding support up and down and left and right, and then tighten all the other fixing hole screws after it is completely matched;
5) The bottom groove of the sliding support is provided with a reinforcing fixing piece. When tapping the self tapping screw, the pressing pieces should be fixed together to strengthen the bearing effect;
6) When the sealing of the fan angle is too tight or not tight, adjust the hexagon adjusting screw under the plug head to adjust the front and rear tightness;
7) Check whether the switch is smooth after installation. Please close the windows when cleaning the exterior wall or before the doors and windows are delivered to the owner for use.
8) Avoid acid-base corrosion debris and too much dust in the bottom groove of the sliding support, which will lead to unsmooth window switch. Be sure to clean it. At the same time, add some lubricating oil to the sliding support regularly to ensure smooth switch, reduce noise and prolong service life.
 
Keyword:
jlm-hc012
the
and
of
to
is
sliding
screw
support
hinge
We could not find any corresponding parameters, please add them to the properties table
Previous
Next

contact information


Business Consulting:
Mr. Ding
133 8025 9489

Miss Yang 189 2728 9996
Email: 2410096915@qq.com

Asia Pacific Office: room a25, 8 / F, Silver Tower, 707-713 Nathan Road, Mongkok, Hong Kong, China

imgboxbg

National Service Hotline: 400 8336 822

Copyright © 2021   All Rights Reserved   Foshan Nanhai Dali xiongtao decoration materials firm  粤ICP备15098155号   300.cn

© 2019 德国库勒五金有限公司 All rights reserved. 粤ICP备19059200号 网站建设:中企动力佛山
  • AMER
  • AMER
    AMER
  • AMER

    服务热线:
    400-8336-822

  • AMER